Sandman™ Mission 2500 Supreme 6x5x14 Pump is more powerful and easier to use. Major benefits are expected from this series in terms of economy even under extreme field conditions as it also stands out by its high operative capability and low maintenance requirements.
View Details
Sandman™ 6x5x14 Mission 2500 Supreme Pump Impellers can cut any size according to the requirements:
H2524-70-30 Impeller 6×5-11 inch
H2524-74-30 Impeller 6×5-11.5 inch
H2524-80-30 Impeller 6×5-12 inch
H2524-84-30 Impeller 6×5-12.5 inch
H2524-90-30 Impeller 6×5-13 inch
H2524-94-30 Impeller 6×5-13.5 inch
H2524-A0-30 Impeller 6×5-14 inch
The Mission 2500 Supreme has a semi-open impeller design that contains wide-tipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids. The 2500 Supreme is available in hard iron, supreme hard iron, and aluminum bronze fluid ends. The pumps can be unitized with electric motors, diesel engines, and hydraulic motors (horizontal, vertical, or close-coupled configuration).
Recommended article:The Ultimate Guide to Choosing mission magnum sandmaster pump
If you want to learn more, please visit our website SUNBO PUMP.
Design Features:
• Versatile stuffing box
• Thick, strong, concentric casing with replaceable casing wear pad
• Casing gasket receded for protection.
• Replaceable stuffing box cover with dual stuffing box bolts
• Long-life, no-adjustment mechanical seal available for near zero leakage
• Replaceable shaft sleeve
• Solid Frame base
• Labyrinth seals for maximum bearing protection
• Duplex angular contact bearings
• Full pipe diameter entrance for minimum turbulence and maximum efficiency
• Wide semi-open impeller creates lower axial thrust for improved bearing life
• All sizes feature the same power end
What is the application of Mission Magnum Pump？
The mission of an oil drilling pump is to facilitate the extraction of oil from underground reservoirs during the drilling process. Oil drilling pumps, also known as mud pumps, are a crucial component of drilling rigs and are used to circulate drilling fluid, commonly referred to as "mud," into the wellbore.
Here's how the pump casing design and materials can vary for oil drilling pumps:
High-Pressure Capability: Oil drilling pumps operate under high-pressure conditions to push the drilling mud down the drill string and into the wellbore. The pump casing needs to be designed to withstand these high pressures, typically ranging from several hundred to several thousand pounds per square inch (psi). The casing walls are made thicker and stronger to handle the pressure without deformation or failure.
Corrosion Resistance: Drilling mud often contains various additives and chemicals to enhance its performance. Some of these substances can be corrosive to pump components, including the casing. Therefore, the pump casing is typically made from corrosion-resistant materials such as stainless steel or specialized alloys to withstand the corrosive effects of the drilling fluid.
Abrasion Resistance: Drilling mud can contain solid particles, including rock cuttings, that can cause abrasion and wear on the pump casing. To combat this, the casing may be constructed with wear-resistant materials or lined with abrasion-resistant coatings to prolong its lifespan and maintain pump efficiency.
Sealing and Preventing Leakage: The pump casing must be designed to prevent leakage of the drilling mud. Special attention is given to sealing points, such as the connections between the casing and other pump components. Sealing mechanisms such as gaskets, seals, or O-rings are incorporated to ensure a tight seal and minimize fluid loss.
Cooling and Lubrication: Oil drilling pumps can generate significant heat due to the high-pressure operation. The casing design may incorporate cooling fins or channels to dissipate heat and maintain optimal operating temperatures. Lubrication systems are also implemented to ensure smooth operation of internal components and reduce friction.
Accessibility and Maintenance: Oil drilling pumps undergo regular maintenance and inspection. The casing design may include features such as removable covers or access ports to provide easy access to internal components for maintenance, repair, or replacement.
These considerations highlight the importance of a well-designed pump casing for oil drilling pumps. The casing's design and material selection are crucial to ensure reliable operation, longevity, and efficient extraction of oil during drilling operations.
If you are looking for more details, kindly visit mission magnum pump parts.
Comments
All Comments (0)