Your Position: Home - Minerals & Metallurgy - Desulfurization
High sulfur levels in fuel, when combined with water vapor, can cause corrosive wear on valve guides and cylinder liners, which can lead to premature engine failure.
For more information, please visit CHIDA.
Sulfur in crude oil, natural gas, process gas and natural gas liquids (LNG) may take many forms, including hydrogen sulfide (H2S), carbonyl sulfide (COS), sulfur oxides (SOx) and the whole family of mercaptans.
Desulfurization is the removal of sulfur or sulfur compounds (as from coal or flue gas), mostly from fuels. The most commonly required desulfurization process is in natural gas, but it is also required for flue gas, coal and oil.
Desulfurization is the removal of sulfur to prevent contamination. Desulfurization has variations, including:
Few of these methods are viable and/or efficient for the desulfurization of heavy oil. This is mainly due to the properties of the heavy oil, such as high sulfur content, high viscosity, high boiling point, and refractory nature of the sulfur compounds.
Natural gas desulfurization is typically accomplished by adsorption. The sulfur is left behind and adsorbed into the activated carbon. Tests are performed regularly to ensure the levels of sulfur remain within acceptable levels. Flue gas desulfurization is required to reduce the amount of sulfur dioxide released into the air. It is a large factor in the formation of acid rain. A device called a scrubber is used to remove sulfur from flue gas.
Contact us to discuss your requirements of Desulfurizer. Our experienced sales team can help you identify the options that best suit your needs.
In coal combustion, to generate electric power and process heat, the sulfur is emitted as SO2, which is seen as one of the main causes of acid rain. This effect has led to an interest in the three main methods of removing coal sulfur: coal cleaning, in-bed desulfurization and flue gas desulfurization. Another method of sulfur removal in coal is through flotation or flocculation.
Desulfurization of oils can be done in two main ways. The first is similar to natural gas desulfurization, which is typically only used if the oil has a relatively low (less than 50ppm) sulfur level to begin with. The second method is microbial desulfurization, which uses the Rhodococcus organism to remove sulfur compounds, reducing air pollution during the refining process.
CSE: Centre for Science and Environment · English
These include effectiveness of the metrics adopted for assessing performance-linked funding in cities; capability and preparedness of the cities to frame the scope of action and coordinate implementation of multi-sector
control equipment and FGD in 75 up to desulphurization plant to reduce thermal power plants (23,489 being made in the iron and steel industrydesulphurization of coke oven gas, waste heat recovery, use
Are you interested in learning more about Ferro Silicon? Contact us today to secure an expert consultation!
65
0
0
Comments
All Comments (0)