Effortlessly Split Rocks with 39mm Hole Compatible Kit!

H2: Effortlessly Split Rocks with 39mm Hole Compatible Kit!

Are you tired of struggling to split rocks and boulders? Look no further than our 39mm Hole Compatible Kit! Follow these step-by-step instructions for effortless rock splitting.

H3: Step 1 - Gather Materials.

For this project, you will need: a 39mm Hole Compatible Kit, a rock or boulder to split, and safety gear including gloves, safety glasses, and ear protection.

H3: Step 2 - Drill Holes.

Using a hammer drill and the correct sized bit, drill 39mm holes evenly spaced along the rock or boulder. Be sure to stay at least two inches away from any previous cracks or fractures.

H3: Step 3 - Insert Wedges.

Insert the wedges into the holes, with the flat side facing outwards. Use the provided hammer to gently tap the wedges into the holes until they are secure.

H3: Step 4 - Apply Pressure.

Attach the hydraulic pump to the wedges using the provided hoses. Pump the hand pump until the rock or boulder begins to crack. Stop pumping once the crack is visible and wait for the pressure to release.

H3: Step 5 - Repeat.

Continue to pump and release the pressure until the rock or boulder is split into desired pieces. Use caution when handling the pieces as they may be sharp.

H3: Step 6 - Clean Up.

Once the rock or boulder is split, remove the wedges and clean up any debris. Properly dispose of any hazardous materials.

H2: Conclusion.

Using the 39mm Hole Compatible Kit, splitting rocks and boulders has never been easier. Remember to follow all safety precautions and instructions for a successful split every time.

If you want to learn more, please visit our website Rock splitting kit compatible with 39mm diameter holes, Split Sets Underground Mining supplier, Split Set Mining Systems.