Your Position: Home - Fireplaces - LEDテープライトの種類、使用方法、加工・接続方法
LED
Link to BLUE DIAMOND
LED1cm1mmSMDCOBLED
RGB31LED
12V
LEDPVC
PVC
LED
LED
SMD2.70mm x 3.20mm LED
SMD5.00mm x 5.30mm LED
3
15SMD/m, 30SMD/m, 60SMD/m 3
60SMD/m 15SMD/m, 30SMD/m
12V60SMD/m 5cm
For more information, please visit COB LED Strip.
LED
1.
2.
3.
4.
1.
LED
2.
3.
4.
Cutable:
The tape light can be cut freely along the welding point. The lamp plate has 10 welding points in total, and can be cut every 2.0 inches (5 cm), and cut any size you need. (Note: After cutting, the remaining part is not connected to the wire, so it cannot be reused. )
(Eye Friendly)
With 180° beam angle, there are 320 COB lamp beads in 1m to make the light more concentrated. The light is uniform, soft and effective. Comfortable and soft, harmless to skin and eyes. High color index for good lighting effect.
3 Modes:
1. Constant lighting mode: Press the power button once, the indicator light will turn red and the lamp will stay on.
2. Motion Sensor Mode: Press the power button twice to turn on the indicator light green, and the lamp turns into motion sensor mode. This mode will automatically turn on when it detects human movement regardless of day or night. It will automatically turn off after 20 seconds when people leave.
3. Motion and Light and Dark Sensor Mode: Press the power button 3 times, the indicator light will light up blue, and the lamp turns into a sense of motion and light sensor mode. This mode will automatically turn on when it detects human movement only at night. It will automatically turn off after 20 seconds when people leave.
Easy to install:
Comes with strong adhesive double sided tape to stick to the desired surface. It has an elongated shape and comes with a cord clip to make the tape light more stable, so you can stick it to a narrow place and you can set it exactly where you want it.
DIY freely
You can freely adjust the length with the tape cut, so you can create the lighting you want to fit your room or furniture. Christmas, Halloween, Party, Wedding, School Festival, Exhibition, Show Atmosphere Decoration Light, 5 meters length can be DIY freely by your own hobby.
Stepless Dimming:
For dimming features, press and hold the button with the triangle mark to dim the brightness steplessly. You can adjust the brightness to your preferences according to your scenes and needs.
Installation Method:
1. Please wipe the dust on the installation area before use.
2, Stick it on the desired surface.
3. Can be cut and adjusted to the length of the tape light according to your needs.
4. Use the included cable clip to secure the tape light.
[Removing Method]
It is easy to remove with hot air from the hair dryer for about 6 minutes. Won't damage or break furniture.
Product Description:
Length: 5M
Voltage: 5V
Power: 8W/M
Color: Bulb Color (K)
Set: 5M tape light x 1, dimmer x 1, cable clip x 5.
[Precautions]
1. Can be cut but if the product is cut other than the line, the light will be defective, so please cut it along the welding point.
2. After cutting the tape light, the rest part is not connected to the wire, so it can not be reused.
3. Please understand that it may generate heat if it remains lit for a long time.
4. The tape light is not waterproof. For safety, please keep the controller and power out of water during use.
If you want to learn more, please visit our website thin led strip.
2
0
0
Comments
All Comments (0)