FAQs of Biomass Briquette Machinery

Below is biomass briquetting knowledge about briquette press and production, shared by ABC Machinery who is a reliable briquette machine manufacturer dedicating to turn-key solutions to optimize production and maximize profits.

Tiantai Product Page

• Questions: Why the briquettes bend easily during the briquetting production?

Answer: There are a lot of factors that can affect the quality of finial briquettes, including compression ratio, the type, size, moisture content of raw materials, the temperature during the production, tolerance clearance between the mould and sleeve and so on. Moisture content is one of the key factors impacting on the briquetting quality. The briquettes will be in a bent shape or bend easily after produced. And there will be cracks and fissure on the finished briquettes. As it stands, you are suggested to check up the moisture content of the raw material. You might need a humidity gauge to get precise results. 

• Question: The briquettes of my production are difficult to form, what wrong?

Answer: There are two reasons that might matters, tolerance clearance and briquetting temperature. The tolerance clearance should be decided according to the raw material. Different materials have different requirement on the clearance. Besides, the temperature of the heater on briquette machinery should also be ensured. Preheating is needed before your briquetting production. Turn on the machinery and let the forming area heating for a while. So when you start the briquetting, the feedstock can be softened to facilitate the compacting process and binding them easily together. 

• Question: What is tolerance clearance refers to?

Answer: Spiral spindle and sleeve are the two key components of biomass briquette machinery. Spiral spindle is also known as screw rod. After feeding biomass materials into the machinery, under high pressure and temperature, they will be squeezed in the space between the screw rod and sleeve. The extruding space is the briquetting zone and it is called tolerance clearance.

Recommended article:
What Features Should You Consider in L-Bar Sealing Machines?

If you are looking for more details, kindly visit Sawdust Briquetting Machine.

• Question: What are the biomass briquettes used for?

The Top 9 Questions of Briquetting Press

1. What kind of material can be processed by this briquette machine?
It is mainly used in the briquettes making of various materials, such as coal powder, coke powder, clime peat, lignite, charcoal powder, fireproof material, desulfurization gypsum, dolomite, iron scale, iron sludge, precipitator dust, iron concentrate, raw material powder, manganese ore fines, silicon-manganese alloy, etc.

2. What is the requested moisture of the input material?
Different materials will require different moistures. Generally, the moisture of the material should be placed around 8-12%.

3. What size of input material is required?
In order to ensure the good quality and mechanical strength of the final product, a special care should be taken in order to ensure that the granule size fed to the machine is maintained below 3mm, preferably in the range of 30-40% smaller than 1&#;2 mm, with no more than 10% over 2 mm.

4. What kind of binder should be used?
Different materials require different binders. Our engineers will recommend you a recipe according to your raw material.

5. What shape of briquette can you make?
We can design the briquettes according to your request. Generally, we can make briquettes into pillow, semi-spherical, square, oval, etc.

6. What equipment do we need for the complete plant?
It depends on the input material. Generally, it consists of a crusher, conveyor, mixer, binder mixer, feeder/silo, briquette machine, dryer, packing machine, etc.

7. Which countries and areas have you exported the machine to?
 We have exported our equipment to a many countries such as Germany, United States, Honduras, Russia, Philippines, Netherlands, Australia, Kenya, Korea, India, Indonesia, Malaysia, Thailand, etc.

8. Have you got screw feeder?
 For the GCXM briquette machine, there is no screw feeder. However, it has four rollers which make it double pressure. And for the high pressure briquette machine, it has screw feeder.

9. Does the machine have hydraulic pressure?
GCXM-1 to GCXM-8 briquette machine has no hydraulic pressure. GCXM-10 to GCXM-30 briquette machine with higher output has hydraulic pressure. And high pressure briquette machine ie dry powder briquette machine has hydraulic pressure.
Product List

• Hydraulic Briquette Press
• Industrial Briquette Maker
• Screw Briquette Machine
• Biomass Briquetting Plant

• Coal/Charcoal/Coke Briquetting Machine
• Mineral Powder Briquetting Machine
• Lime Briquetting Machine

• Crusher
• Mixer
• Screw Feeder
• Mesh Belt Dryer
• Drying Machine

Project News Celebration for 14 Anniversary Day of Our Company&#; Founding
Sep 10,

September 7, is a memorable day for all the staff of our company, because the day is the big of 14 annive...

ABC Machinery Attend The 122th Autumn Canton Fair
Oct 18,

The 122th Autumn Canton Fair held in Guangzhou, China during October 15 -19, ....

Copyright Notice
May 19,

All the content o this site such as logo, photograph, product information, project information and company new...