Wholesale Epoxy Resin Adhesive
A leading industrial adhesive manufacturer, Adhesives Technology Corporation (ATC) has forty-five years of industry experience and is the United States' leading specialist in adhesives for construction-related anchoring, doweling and concrete repair. ATC manufactures epoxies, urethanes, acrylics, ester blends, polyethers and polyureas, many of which depend on a ready supply of wholesale epoxy resins.
Epoxy Resin Wholesale Services
- Epoxies
- Urethanes
- Polyureas
- Ester Blends
- PolyethersAcrylics
ATC is a critical part of the construction and repair of the world's infrastructure. In addition to vertical construction and bridge work we support the mining and railroad industries, airport runway and hangar floor integrity, retail construction and earthquake relief and recovery. Besides anchoring, doweling, bonding, concrete repair and joint treatment, we have a maintenance and restoration clientele across many industries including heavy duty construction and industrial projects.
We are the ultimate source for epoxy adhesives, epoxy glue, epoxy coatings, epoxy floor coatings, epoxy glues, and much more. We have been very successful with providing training and specialized solutions that meet our customers' requests.
We have perfected the products we sell and are continually developing new formulas to help concrete contractors complete their post-installation jobs and make quick, reliable repairs for a variety of construction projects.
As an industrial adhesive manufacturer, we offer a range of brands.
ULTRABOND® is our line of chemical anchoring and doweling products, many of which are compliant with the International Building Code (IBC).
CRACKBOND® is a range of concrete repair and maintenance products, including crack injection and sealing solutions.
MIRACLE BOND® is one of the world's most popular maintenance adhesives used for rapid, economical repairs to all types of surfaces.
THE CRACKER® is a non-explosive, noise-free concrete demolition agent.
* ATC is not a resin manufacturer. We do sell resin products in bulk and cartridge formulations along with fully-formulated products.
Are You Installing Chemical Anchors?
Post-installed concrete anchors are one of our specialties. We offer four IBC compliant anchoring adhesives. All of them have multiple US state DOT approvals.
ULTRABOND® HS-1CC is the world's strongest anchoring epoxy and is available in both cartridge and bulk packaging. It features a 1:1 mix ratio and is NSF 61 compliant.
If you are looking for more details, kindly visit HumenChem.
Recommended article:How to Choose a Metal Packaging Coatings Manufacturer?ULTRABOND® HYB-2CC is a hybrid adhesive approved for application in temperatures down to 23 °F. And for jobs where a quick cure rate is required, it will cure completely in 30 minutes at 70 °F.
ULTRABOND® EPX-3CC provides a very high strength bond and is the best code-approved anchoring and doweling epoxy for general high-volume specifications.
ULTRABOND® ACRYL-8CC has a full cure rate of 45 minutes at 70° F (21° C) and an 18-month shelf life. With an extended in-service temperature range of 14 °F to 248 °F (-10 °C to 120 °C, it withstands freeze-thaw conditions.
Doweling Adhesives For a Range of Applications (Multi-state DOT Approvals)
ULTRABOND® is a high-strength, non-sag epoxy with a non-abrasive consistency ideal for use in bulk dispensing systems without adverse wear on pumps.
ULTRABOND® ASF- is a fast curing cold weather doweling adhesive.
Do Your Concrete Floors Need Void, Spall or Crack Repair?
When cracks and voids must be repaired, ATC provides a range of products suitable for pressurized crack injection, as well as gravity feed application.
CRACKBOND® LR-321 LV is a structural epoxy adhesive with low-viscosity and high strength. It is NSF 61 certified with lower toxicity levels than major competitors in its category. It can also be used for grouting and surface treatment.
CRACKBOND® LR-321 SLV provides a longer working time than most competitive products and is a solvent-free epoxy that is moisture insensitive and suitable for both pressure injection and gravity-feed crack repairs. Works in structural concrete, masonry and wood.
CRACKBOND® LR-321 TXO is a high strength epoxy gel for pressure injection into blind side voids. A thixotropic epoxy, it flows under pressure but stops flowing when pressure is released, preventing the epoxy from continuing to flow into open spaces. Low-odor and moisture insensitive, it can be applied in a broad temperature range of 50 ˚F to 100 ˚F.
Bridge and Parking Deck Maintenance and Repair
When high traffic surfaces with heavy loads develop cracks, a good product to consider is CRACKBOND® HEALER/SEALER. It is an ultra-low viscosity, fast-cure, high strength epoxy penetrant that reduces water and chloride intrusion to prevent rebar corrosion. It seals surface micro-cracks to extend the service life of elevated horizontal concrete surfaces.
For surfaces subject to lower stress, CRACKBOND® CSR offers an alternative to epoxy. It is a urethane-based hybrid crack and spall repair product that quickly penetrates concrete for fast repairs. Self-leveling, resilient and impact resistant, it cures down to 0 ˚F, allowing fast return to service times of 45-60 minutes at room temperature. It can also be colored with tile grout powders.
A Range of Products for Joint Repair
Sometimes epoxy is not the preferred repair product. That's especially true when protecting control joint edges in concrete surfaces from spalling due to wheeled traffic. CRACKBOND® JF-82 FAST is a rapid-curing polyurea product with excellent tensile strength and a very broad application temperature range of -40 ˚F to 120 ˚F. It's often used in airport hangars.
Alternatively, CRACKBOND® JF is an elastomeric, rapid-curing polyurea joint filler that allows 10-15% movement of installed joint width. It is solvent-free, low viscosity and self-leveling for use as a control joint filler for interior, horizontal surfaces.
Both of these products are available from Adhesives Technology Corporation in cartridge as well as bulk packaging.
Wholesale Epoxy Resin Adhesives
Adhesives Technology Corporation, has over forty-five years of experience in the field of industrial adhesives. So if you want to know where to buy the very best industrial adhesives, look no further than Adhesives Technology Corporation. In fact, some of the most highly respected companies in the world put their trust in us to provide private label products. No epoxy resin manufacturer can outperform ATC. We beat the cheap resin manufacturers online by supplying the best resin products and industrial adhesives on the market today.
To save time and reduce hassles, don't shop around. Make Adhesives Technology Corporation your online epoxy resin products source for the best industrial adhesives for all your projects. Our representatives are trained and determined to give you the very best service and the very best products. Tested in the lab. Proven on the job.
Are you interested in learning more about Adhesives Exporter? Contact us today to secure an expert consultation!
Comments
All Comments (0)