Types of Drilling Rigs and Structures

   There are many different types of drilling rigs. Which rig selected depends on the specific requirments of each drill site. Rigs are generally categorized as onshore(land) or offshore(marine).       

Are you interested in learning more about crawler mounted pneumatic drilling rig? Contact us today to secure an expert consultation!

      Onshore rigs are all similar, and many modrn rigs are of the cantilevered mast, or “Jackknife” derrick type. This type of rig allows the derrick to be assembled on the ground, and then raised to the vertical position using power from the drawworks, or hoisting system. These structures are made up of prefabricated sections that are moved onto the location by truck, barge, helicopter, etc.                                              

        Offshore drilling are divided into two types: Fixed structure types and Floating structure types.  

       Jack-up Rig. This is a self-elevating rig, and is used for smaller, shallower offshore deposits. The rig’s floating platform is towed into position by barges, then lowers its support legs down to the sea floor, raising the rig above the water’s surface.

       Concrete Platform. Concrete offshore structures show an excellent performance. They are highly durable, suitable for harsh and arctic environment and can carry heavy topsides. Often offer storage capacities and are very economical for water depths larger than 150m. Gravity type platforms need no additional fixing because of their large foundation dimensions and extremely high weight.               

        Compliant tower. Compliant tower rigs are similar to fixed platforms, since both are anchored to the seabed and hold most of their equipment above the surface. Since its design consists of a narrow and flexible tower, it can withstand large lateral forces by sustaining significant lateral deflections.

             Floating Offshore Structure(moored to the seabed).

            Barge Rig. Although Barge rigs are not moored to the sea floor, they are explained in this section. They are floating offshore drilling vessels but it is not self-propelled. The drilling equipment is on the barge. It is generally towed to the location and then has its hull filled with water. This type of rig is only used in relatively shallow, swampy areas and are generally capable of drilling in water depths of less than 12ft, or, in the case of a posted barge, perhaps to 20ft.

          Submersible Rig. A Submersible rig is a larger version of a posted barge and is capable of water depths of 18ft to 70ft. It has a floating drill unit that includes columns and pontoons that if flooded with water, will cause the pontoons to submerge to a depth that is predetermined.

           Semisubmersible Rig. They are the most common type of offshore drilling rigs, combining the advantages of submersible rigs with the ability to drill in deep water. The semisubmersible rig does not rest on the seafloor. This rig is a floating deck supported by submerged pontoons and kept stationary by a series of anchors and mooring lines, and, in some cases, position-keeping propellers. They have a water-depth operating range of 20ft to 2000ft.

        Tension-leg Platform. It consists of a floating surface structure held in place by taut, vertical tendons connected to the seafloor. These long, flexible legs allow for significant side to side movement, with little vertical movement. TLP can operate as deep as 7000ft.

           Spar Platform. Spar platforms are among the largest offshore platforms in use. These huge platforms consist of a large cylinder supporting a typical fixed rig platform. The cylinder however does not extend all the way to the seafloor, but instead tethered to the bottom by a series of cables and lines. The large cylinder serves to stabilize the platform in the water, and allows for movement to absorb the force of potential hurricanes.

            DrillShips. Drillships are most often utilized for extremely deep water drilling at remote locations. A “floater” like the semisubmersible, a drillship must maintain its position at the drilling position by anchors and mooring lines, or by computer-controlled dynamic positioning equipment. Most drillships have greater storage capacity than other types of rigs, allowing efficient operation at remote locations.

References:

Shadizadeh Seyyed Reza, Offshore Drilling Engineering, Course Note

Sadeghi Kabir, An Overview of Design, Analysis, Construction and Installation of Offshore Petroleum Platforms Suitable for Cyprus Oil/Gas Fields, Girne American University, Department of Industrial Engineering, Mersin 10, Turkey, 2007

Ali Seyyedalangi- M.Sc in Drilling Engineering

There are many types of offshore platforms used for oil and gas drilling and exploration. Some of these are fixed to the ocean floor and others are floating platforms or vessels. Each is designed for different water depths and purposes. Some floating production systems may include storage or refinery facilities and employ hundreds of maritime workers.

For more information, please visit top hammer drill rigs.

There are 5 main types of drilling platforms, each with several unique variations.

#1 Barge Rigs

Barge rigs work in shallower waters, usually less than 20 feet deep. After being floated to the drilling location, the hull is brought to rest on the ocean floor, creating a stable platform for drilling. Many barge rigs operate in the Gulf of Mexico and around the world.

#2 Submersible Rigs

In waters too deep for a barge, but less than 50-70 feet deep, a submersible rig can be used.

Columns or posts are submerged into the water and filled to specific levels that determine their depth. Drilling equipment on the platform above drives a floating drill unit below.

#3 Jack-Up Rigs

As we move into deeper waters, a mobile platform called the “jack-up” rig comes into play. It gets this name because it can be moved directly over the location to drill or pump oil. The rig can be self-elevated (jacked up) from the bottom of the ocean floor to secure it in place. Jack-up rigs are well suited for shallow waters of 400 feet or less.

There are two types of jack-up rigs:

• Cantilevered Jack-up, with a drilling derrick mounted on an extending arm
• Keyway or Slot Jack-up, which has a drilling unit on the platform over an opening it drills through

#4 Platform Rigs

Many offshore oil rigs are anchored platforms. They use a steel framework anchored to the ocean floor as a foundation for a surface drilling rig, equipment, and living quarters. Platforms may drill in many directions from this base, and they are broken down into specific types suited for various depths.

Fixed Platforms

Fixed platforms are made of steel or cement and are intended to be permanent structures. They house large facilities, heavy equipment, and big crews. Most are located on the continental shelf in deep water up to 1700 feet.

They can drill directionally with a radius of up to five miles. The platform is held in place by large steel or concrete legs that attach to the ocean floor.

Compliant Towers

When the oil or gas is even deeper, from 1500 up to 4900 feet, a compliant tower may be used. These structures are made of concrete and steel and are tall and narrow. They are intended to flex and sway with the wind and waves.

Up to 3000 feet, they attach firmly to the sea bed, but, for greater depths, a tension leg platform may be used. These towers are technically floating platforms that are secured with a series of anchors and cables. They are fixed but also floating, and they can reach depths of 7000 feet.

#5 Floating Rigs or Floaters

In very deep water, it is not practical to attach an offshore rig to the bottom of the ocean. Floating oil rigs are kept in place by anchors or dynamic positioning systems that keep them over target. There are several types of floaters in use at various deep water drilling locations worldwide.

Semi-Submersible Platforms

For deeper waters up to 12,000 feet, the preferred method of exploration and drilling is to use semisubmersibles or drill ships. Semisubmersible work-decks float on top of the water, while the vast majority of their mass is contained below the water to help stabilize the platforms and keep them in place. As a result, the deck is rather stable and well-suited for drilling in rough waters 3000-10,000 feet deep. However, semisubmersibles are not easily moved.

Two notable types of semi-submersible rigs include:

• Sea Star Platforms, which use flexible steel legs rather than anchors, usually in less than 3500 feet of water.
• Spar Platforms, which sit on a hollow cylinder that hangs below the water at a depth of approximately 700 feet. This stabilizes the platform, allowing drilling up to 10,000 feet.

Drill Ships

For new exploration and the drilling and capping of new wells, drill ships are typically used. Drill ships have the drilling equipment installed directly on the deck, typically in the middle of the deck. The well is drilled through the “moon pool,” an opening in the center of the ship. They are kept in place by dynamic positioning.

Worker Safety on All Oil Rigs

Working on any vessel or platform rig carries with it certain risks. Owners and operators of rigs need to take steps to help protect their workers and provide safe working environments. In the event they are negligent and workers are injured, they can be held accountable under maritime law.

If you are an oil rig worker, seaman, or vessel worker and have been injured while in the service of a vessel or ship, you could be entitled to monetary compensation. To find out more about your legal rights and if you have grounds for a personal injury lawsuit or “maintenance and cure,” contact the Jones Act attorneys at Schechter, Shaffer & Harris, L.L.P.

The company is the world’s best borehole drilling equipment supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.