VOLVO CONSTRUCTION EQUIPMENT

Volvo tooth system

Parts reference guide

VOLVO tooth system &#; discover the difference

The bucket&#;s tooth system is exposed to extreme stresses when
it encounters a combination of hard materials, shocks and high
breakout forces. In that environment it&#;s impossible to eliminate wear
&#; but it is possible to reduce the effect it has on the tooth system.
The great challenge is designing a tooth system that is optimized
for the forces and wear to which it is exposed. Such a tooth system
gives optimum service life with maintained performance. Volvo has
faced that challenge and succeeded. Discover the difference.

Success is built from High quality Total operating economy is the key
the ground up When choosing steel, there is no Design and material selection make Volvo
It is important that the tooth system is compromising. Volvo&#;s teeth have the tooth system the obvious choice for all
engineered correctly and that it has the right balance between hardness and high applications.
right design to give optimized efficiency tension steel, which is the key to quality
and the longest possible wear life. and long wear life. Better penetration capability gives:
Volvo tooth system is another result of The teeth consist of a specifically designed &#; better and faster bucket filling
Volvo&#;s commitment to innovation and steel alloy, with a hardness of approx. 500
development. The tooth system has Brinell, dependant on the type and size of &#; less wear of bucket, machine and tires
undergone extensive field testing in various the tooth.
types of materials and applications to From the selection of raw materials for the &#; lower fuel consumption
analyze and to ensure its high quality and molten steel to blasting and heat treatment
good characteristics. of the finished teeth, continuous checks Long service life due to:
It has shown several advantages, and measurements are performed to avoid &#; strategically placed wear material
for example: any deviations with regards to steel quality,
&#; The teeth have a self-sharpening design technical specifications and the fit of the &#; High-quality steel alloy
which gives them long-lasting good tooth and adapter.
penetration capability and high productivity. &#; self-sharpening design
&#; Strategically placed wear material in the Wide product range
thooth design provides maximum wear life. In the Volvo Tooth System range, there &#; correct fit between adapter and tooth
&#; The correct fit between the tooth and are teeth and adapters for all types of
adapter, as well as large stabilizing applications, from handling easily broken Shorter downtime when changing
surfaces, provides a very strong unit which bank materials to breaking out hard and gives:
can withstand high tolerance from forces rocky materials, such as shot rock.
and stresses. The adapters are developed to fit new &#; lower maintenance costs
&#; High-quality steel alloy increases wear Volvo buckets, as well as accommodate
resistance. bucket rebuilds for older machines from &#; increased productivity
&#; A vertical patented locking device makes Volvo Construction Equipment.
For instructions about welding on different
mounting and removing fast and easy. types of adapters on buckets, contact your
nearest Volvo Construction Equipment
dealer.

2

3

The powerful PATENTED tooth system from Volvo

Distribution of forces F R2 Better
F A resistance to forces
Volvo tooth system has a longer
distance between A and B B The edge of the adapters and teeth have
compared to other systems. When R1 an acute angle, less than 90 degrees.
the tooth is exposed to shocks and This gives better resistance to frontal
forces from the side or vertically R2 forces and reduces the risk of the
(F), the reactive forces (R1 and &#;tooth box&#; opening.
R2) are lower compared to other B
systems in identical working A
conditions. The &#;tooth box&#;,
meaning the connection between R1
the tooth and the adapter, provides
optimal absorption of the stresses
to which it is exposed.

Self-
sharpening teeth

Due to their profile, the teeth have
a small penetration area, which gives
reduced penetration force. This provides

better bucket fill factor, lower fuel
cons­ umption as well as reduced wear

on bucket, machine and tires.
The self-sharpening

design and strategically placed wear
material give maximum wear
life with maintained
performance.

4

Locking
device

The unique positive locking device
integrates the locking pin completely in the

adapter body. Position and design give
complete protection. The locking device
consists of two components: one reusable steel
pin as well as an elastic and flexible lock
retainer. The design of the tooth and adapter
gives a smooth transfer of forces, without
the locking device having to absorb the

stresses, resulting in a locking
device with significantly
longer service life.

Two parts,
one unit

A perfect fit between the tooth and
adapter, together with large stabilizing
surfaces, provides a very strong unit with

minimal internal wear. Stresses are
reduced due to minimum

movement between the tooth
and adapter.

Robust design

Reinforced area that protects the
adapter and the tooth&#;s guide lugs

from early wear.

Segments between teeth (for wheel loaders)
You get a number of advantages with segments between the teeth. They give:
&#; Up to five times longer service life for the cutting edge than without
protection between the teeth.
&#; Protection of the bucket floor.
&#; Longer adapter service life.
&#; Prevent uneven wear of the cutting edge.

5

Guide tables Volvo tooth system for skidsteer loaders

Machine model Volvo Part No Description Designation Type/application Weight kg
Flush-mounted
Volvo VOE Adapter LA5FC20 Bolt-on 1.3
MC60/B-110/B VOE Adapter LA5FCB16 1.7
VOE Screw M16 L = 50 mm General Purpose
VOE Nut M16 0.7
VOE Tooth 5GPC Tool for mounting and removal of teeth 0.03
VOE Locking device, complete*) 5/8P 0.9
VOE Retainer 5/8R
VOE Tool 5/10T

Guide tables Volvo tooth system for compact wheel loaders

Machine model Volvo Part No Description Designation Type/application Weight kg
Volvo
L20B-L35/B VOE Adapter LA8FC20 Flush-mounted 1.8
VOE Tooth 8GPC General Purpose 1.2
L40/B-L50F VOE Locking device, complete*) 5/8P 0.03
VOE Retainer 5/8R Tool for mounting and removal of teeth
VOE Tool 5/10T Flush-mounted 0.9
General Purpose
VOE Adapter LA10FC25 3.7
VOE Tooth 10GPL Tool for mounting and removal of teeth 2.4
VOE Locking device, complete*) 10P 0.03
VOE Retainer 10R
VOE Tool 5/10T 0.9

Guide tables Volvo tooth system for backhoe loaders

Machine model Volvo Part No Description Designation Type/application Weight kg
Volvo
Loader bucket VOE Adapter LA8FC20 Flush-mounted 1.8
BL60/61-70/71 VOE Tooth 8GPC General Purpose 1.2
VOE Locking device, complete*) 5/8P 0.03
Excavator bucket VOE Retainer 5/8R Tool for mounting and removal of teeth
BL60/61-70/71 VOE Tool 5/10T Tooth and adapter in one piece 0.9

VOE Monobloc tooth MB8 2.4
VOE Screw M20 L= 70 mm
VOE Nut M20

VOE Adapter EA8BL20 Bottom leg 1 1/2 (long bottom leg) 2.0
VOE Tooth 8GPC General Purpose 1.2
VOE Tooth 8PPC Extremely compact material 1.0
VOE Tooth 8TPC Extremely compact material 1.5
VOE Tooth 8SNC Levelling, cleaning, grading and backfilling 1.4
VOE Locking device, complete*) 5/8P 0.03
VOE Retainer 5/8R Tool for mounting and removal of teeth
VOE Tool 5/10T 0.9
Tooth and adapter in one piece
VOE Monobloc tooth MB8 2.4
VOE Screw M20 L= 70 mm
VOE Nut M20

*) Locking device complete consists of pin and retainer.
Note: Volvo Tooth System will also fit older machines from Volvo Construction Equipment.

6

Guide tables Volvo tooth system for compact excavators

Machine model Volvo Part No Description Designation Type/application Weight kg
Volvo
EC35/C-ECR38 VOE Adapter EA5BLU Bottom leg universal 1.2
VOE Tooth 5GPC General Purpose 0.7
EC45-EC70 VOE Locking device, complete*) 5/8P 0.03
ECR48C- ECR88 VOE Retainer 5/8R Tool for mounting and removal of teeth
VOE Tool 5/10T Tooth and adapter in one piece 0.9

VOE Monoblock tooth MB8 2.4
VOE Screw M20 L= 70 mm
VOE Nut M20 Bottom leg 1 1/2 (long bottom leg) 2.0
General Purpose 1.2
VOE Adapter EA8BL20 Extremely compact material 1.0
VOE Tooth 8GPC Extremely compact material 1.5
VOE Tooth 8PPC Levelling, cleaning, grading and backfilling 1.4
VOE Tooth 8TPC 0.03
VOE Tooth 8SNC Tool for mounting and removal of teeth
VOE Locking device, complete*) 5/8P 0.9
VOE Retainer 5/8R Tooth and adapter in one piece
VOE Tool 5/10T 2.4

VOE Monoblock tooth MB8
VOE Screw M20 L= 70 mm
VOE Nut M20

*) Locking device complete consists of pin and retainer
Note: Volvo Tooth System will also fit older machines from Volvo Construction Equipment.

7

Guide tables Volvo tooth system for wheel loaders

Machine model Volvo Part No Description Designation Type/application Weight kg

Volvo VOE Adapter LA10FC20 Flush-mounted 3.6
L50/E VOE Adapter LA10BN20 Bolt-on 4.9
VOE Screw M16 L=70 mm
VOE Nut M16 General Purpose 2.4
VOE Tooth 10GPL Abrasive Material 2.5
VOE Tooth 10AML Standard 0.03
VOE Locking device, complete*) 10P Standard
VOE Retainer 10R Tool for mounting and removal of teeth 0.9
VOE Tool 5/10T
3.7
L60E/F VOE Adapter LA10FC25 Flush-mounted 4.0
L70/F Top leg 1 1/2 (long top leg) 5.2
VOE Adapter (for L70/F) LA10TL25 Bolt-on
VOE Adapter LA10BN25 2.4
VOE Screw M16 L=70 mm General Purpose 2.5
VOE Nut M16 Abrasive Material 0.03
VOE Tooth 10GPL Standard
VOE Tooth 10AML Standard 0.9
VOE Locking device, complete*) 10P Tool for mounting and removal of teeth
VOE Retainer 10R 6.1
VOE Tool 5/10T 6.3
6.8
L90/F VOE Adapter LA15FC30 Flush-mounted
VOE Adapter LA15TL30 Top leg 1 1/2 (long top leg) 3.4
VOE Adapter LA15BN30 Bolt-on 4.3
VOE Screw M20 L=80 mm 5.0
VOE Nut M20 General Purpose 0.07
VOE Tooth 15GPL Abrasive Material
VOE Tooth 15AML Abrasive Material with extra wear metal 9.5
VOE Tooth 15AMXL Standard
VOE Locking device, complete*) 15P Standard 1.1
VOE Retainer 15/20R Heavy duty
VOE Retainer 15/20MR Bolt-on 6.8
VOE Corner adapter LA15CR30 6.2
VOE Screw 1 1/4&#; UNC Tool for mounting and removal of teeth 8.0
VOE Washer 31x58
VOE Nut 1 1/4&#; UNC 4.3
VOE Tool 15/30T 5.0
0.07
L110E/F VOE Adapter LA15FC35 Flush-mounted
L120/F Top leg 1 1/2 (long top leg) 9.5
VOE Adapter LA15TL35 Bolt-on
VOE Adapter LA15BN35 1.1
VOE Screw M20 L=90 mm Abrasive Material
VOE Nut M20 Abrasive Material with extra wear metal 10.3
VOE Tooth 15AML Standard 9.0
VOE Tooth 15AMXL Standard 10.5
VOE Locking device, complete*) 15P Heavy duty
VOE Retainer 15/20R Bolt-on 5.7
VOE Retainer 15/20MR 6.1
VOE Corner adapter LA15CR30 Tool for mounting and removal of teeth 7.6
VOE Screw 1 1/4&#; UNC 0.1
VOE Washer 31x58
VOE Nut 1 1/4&#; UNC 1.1
VOE Tool 15/30T
8.8
VOE Adapter LA20FC35 Flush-mounted 8.7
VOE Adapter LA20TL35 Top leg 1 1/2 (long top leg) 10.3
VOE Adapter LA20BN35 Bolt-on
VOE Screw M20 L=90 mm 5.7
VOE Nut M20 General Purpose 6.1
VOE Tooth 20GPL Abrasive Material 7.6
VOE Tooth 20AML Rock and highly abrasive materials 0.1
VOE Tooth 20AMRL Standard
VOE Locking device, complete*) 20P Standard 13.6
VOE Retainer 15/20R Heavy duty
VOE Retainer 15/20MR Tool for mounting and removal of teeth 1.1
VOE Tool 15/30T

L150/F VOE Adapter LA20FC40 Flush-mounted
L180/F Top leg 1 1/2 (long top leg)
VOE Adapter LA20TL40 Bolt-on
VOE Adapter LA20BN40
VOE Screw M24 L=100 mm General Purpose
VOE Washer 25x45 Abrasive Material
VOE Nut M24 Rock and highly abrasive materials
VOE Tooth 20GPL Standard
VOE Tooth 20AML Standard
VOE Tooth 20AMRL Heavy duty
VOE Locking device, complete*) 20P Bolt-on
VOE Retainer 15/20R
VOE Retainer 15/20MR Tool for mounting and removal of teeth
VOE Corner adapter LA20CR40
VOE Screw M24 L=100 mm
VOE Washer 25x45
VOE Nut M24
VOE Tool 15/30T

*) Locking device complete consists of pin and standard retainer. **) Locking device complete consists of pin, hot slag retainer and two springs.

8

Machine model Volvo Part No Description Designation Type/application Weight kg

Volvo VOE Adapter LA30FC40 Flush-mounted 12.7
L150/F VOE Adapter LA30TL40 Top leg 1 1/2 (long top leg) 12.0
L180/F VOE Adapter LA30BN40 Bolt-on 11.7
L220/F VOE Screw M24 L=100 mm
VOE Washer 25x45 General Purpose 7.3
VOE Nut M24 Abrasive Material 9.1
VOE Tooth 30GPL Rock and highly abrasive materials 10.7
VOE Tooth 30AML Standard 0.15
VOE Tooth 30AMRL Standard
VOE Locking device, complete*) 30P Heavy duty 0.2
VOE Retainer 30/40R Hot slag 0.03
VOE Retainer 30/40MR Hot slag 16.3
VOE Locking device, complete**) 30PHS Bolt-on
VOE Retainer***) 30/40MRS 1.1
VOE Corner adapter LA30CR40 Tool for mounting and removal of teeth
VOE Screw M24 L=100 mm
VOE Washer 25x45
VOE Nut M24
VOE Tool 15/30T

L220/F VOE Adapter LA40TL40 Top leg 1 1/2 (long top leg) 19.8
VOE Adapter LA40TL50 Top leg 1 1/2 (long top leg) 20.1
VOE Tooth 40AMRL Rock and highly abrasive materials 16.1
VOE Locking device, complete*) 40P Standard 0.2
VOE Retainer 30/40R Standard
VOE Retainer 30/40MR Heavy duty 0.3
VOE Locking device, complete**) 40PHS Hot slag 0.03
VOE Retainer***) 30/40MRS Hot slag 1.3
VOE Tool 40/55T Tool for mounting and removal of teeth

L330/E VOE Adapter LA55FC65 Flush-mounted 23.0
L350F 26.6
VOE Adapter LA55TL65 Top leg 1 1/2 (long top leg) 13.9
VOE Tooth 55GPL General Purpose 17.8
VOE Tooth 55AML Abrasive Material 21.7
VOE Tooth 55AMRL Rock and highly abrasive materials 0.3
VOE Locking device, complete*) 55P Standard
VOE Retainer 55/65R Standard 0.4
VOE Retainer 55/65MR Heavy duty 0.05
VOE Locking device, complete**) 55PHS Hot slag 1.3
VOE Retainer***) 55/65MRS Hot slag 39.5
VOE Tool 40/55T Tool for mounting and removal of teeth
VOE Segment, cast BPL55BN65 Bolt-on
VOE Screw 1.25-7 UNC
VOE Nut 1.25-7 UNC

***) Retainer complete consists of hot slag retainer and two springs. Note: Volvo Tooth System will also fit older machines from Volvo Construction Equipment.

9

Guide tables Volvo tooth system for excavators

Machine model Volvo Part No Description Designation Type/application Weight kg
Volvo
EC/EW140/C VOE Adapter EA15BL30 Bottom leg 1 1/2 (long bottom leg) 5.9
ECR145C VOE Tooth 15GPE General Purpose 3.1
EW145B VOE Tooth 15AMRE Abrasive material with extra wear metal 3.6
EC/EW160/C VOE Tooth 15PPE Extremely compact material 2.8
EC/EW180/C VOE Tooth 15TPE Extremely compact material 3.7
EC/EW210/C VOE Tooth 15SNE Levelling, cleaning, grading and backfilling 3.8
EC/EW210/C&#; VOE Locking device, complete*) 15P Standard 0.07
EC240/C VOE Retainer 15/20R Standard
VOE Retainer 15/20MR Heavy duty 1.1
EC290/C VOE Tool 15/30T Tool for mounting and removal of teeth 10.4
ECR305C VOE Adapter EA20BL40 Bottom leg 1 1/2 (long bottom leg) 4.5
VOE Tooth 20GPE General Purpose 5.4
EC330/C VOE Tooth 20AMRE Abrasive material with extra wear metal 4.0
EC360/C VOE Tooth 20PPE Extremely compact material 5.4
EC460/C VOE Tooth 20TPE Extremely compact material 5.8
EC460/C VOE Tooth 20SNE Levelling, cleaning, grading and backfilling 0.1
VOE Locking device, complete*) 20P Standard
EC700/C VOE Retainer 15/20R Standard 1.1
VOE Retainer 15/20MR Heavy duty 12.5
VOE Tool 15/30T Tool for mounting and removal of teeth 6.7
VOE Adapter EA30BL40 Bottom leg 1 1/2 (long bottom leg) 7.8
VOE Tooth 30GPE General Purpose 5.6
VOE Tooth 30AMRE Abrasive material with extra wear metal 6.9
VOE Tooth 30PPE Extremely compact material 8.4
VOE Tooth 30TPE Extremely compact material 0.15
VOE Tooth 30SNE Levelling, cleaning, grading and backfilling
VOE Locking device, complete*) 30P Standard 0.2
VOE Retainer 30/40R Standard 0.03
VOE Retainer 30/40MR Heavy duty 1.1
VOE Locking device, complete**) 30PHS Hot slag 20.1
VOE Retainer***) 30/40MRS Hot slag 9.4
VOE Tool 15/30T Tool for mounting and removal of teeth 11.5
VOE Adapter EA40BL50 Bottom leg 1 1/2 (long bottom leg) 8.1
VOE Tooth 40GPE General Purpose 10.6
VOE Tooth 40AMRE Abrasive material with extra wear metal 12.9
VOE Tooth 40PPE Extremely compact material 0.2
VOE Tooth 40TPE Extremely compact material
VOE Tooth 40SNE Levelling, cleaning, grading and backfilling 0.3
VOE Locking device, complete*) 40P Standard 0.03
VOE Retainer 30/40R Standard 1.3
VOE Retainer 30/40MR Heavy duty 24.5
VOE Locking device, complete**) 40PHS Hot slag 13.0
VOE Retainer***) 30/40MRS Hot slag 15.9
VOE Tool 40/55T Tool for mounting and removal of teeth 11.7
VOE Adapter EA55BLX50 Extra long top leg 14.7
VOE Tooth 55GPE General Purpose 17.8
VOE Tooth 55AMRE Abrasive material with extra wear metal 0.3
VOE Tooth 55PPE Extremely compact material
VOE Tooth 55TPE Extremely compact material 0.4
VOE Tooth 55SNE Levelling, cleaning, grading and backfilling 0.05
VOE Locking device, complete*) 55P Standard 1.3
VOE Retainer 55/65R Standard 31.6
VOE Retainer 55/65MR Heavy duty 34.6
VOE Locking device, complete**) 55PHS Hot slag 16.0
VOE Retainer***) 55/65MRS Hot slag 21.1
VOE Tool 40/55T Tool for mounting and removal of teeth 15.7
VOE Adapter EA65BL50 Bottom leg 1 1/2 (long bottom leg) 20.1
VOE Adapter EA65BL60 Bottom leg 1 1/2 (long bottom leg) 28.1
VOE Tooth 65GPE General Purpose 0.4
VOE Tooth 65AMRE Abrasive material with extra wear metal
VOE Tooth 65PPE Extremely compact material 0.5
VOE Tooth 65TPE Extremely compact material 0.05
VOE Tooth 65SNE Levelling, cleaning, grading and backfilling 1.8
VOE Locking device, complete*) 65P Standard 40.8
VOE Retainer 55/65R Standard 40.1
VOE Retainer 55/65MR Heavy duty 23.0
VOE Locking device, complete**) 65PHS Hot slag 27.5
VOE Retainer***) 55/65MRS Hot slag 20.2
VOE Tool 65/125T Tool for mounting and removal of teeth 25.5
VOE Adapter EA80BL65 Bottom leg 1 1/2 (long bottom leg) 0.50
VOE Adapter EA80BL70 Bottom leg 1 1/2 (long bottom leg)
VOE Tooth 80GPE General Purpose 0.7
VOE Tooth 80AMRE Abrasive material with extra wear metal 0.09
VOE Tooth 80PPE Extremely compact material 1.8
VOE Tooth 80TPE Extremely compact material
VOE Locking device, complete*) 80P Standard
VOE Retainer 80/125R Standard
VOE Retainer 80MR Heavy duty
VOE Locking device, complete**) 80PHS Hot slag
VOE Retainer***) 80MRS Hot slag
VOE Tool 65/125T Tool for mounting and removal of teeth

*) Locking device complete consists of pin and standard retainer **) Locking device complete consists of pin, hot slag retainer and two springs.
***) Retainer complete consists of hot slag retainer and two springs. Note: Volvo Tooth System will also fit older machines from Volvo Construction Equipment.

10

Heavy Duty, guide tables Volvo tooth system for excavators

Machine model Volvo Part No Description Designation Type/application Weight kg

Volvo VOE Adapter EA20BLX30 Extra long top leg 11.2
EC/EW140/C VOE Tooth 20AMRE Abrasive material with extra wear metal 5.4
ECR145C VOE Locking device, complete*) 20P Standard 0.1
EW145B VOE Retainer 15/20R Standard
EC/EW160C VOE Retainer 15/20MR Heavy Duty 1.1
EC/EW180/C VOE Tool 15/30T Tool for mounting and removal of teeth

EC/EW210/C VOE Adapter EA30BLX40 Extra long top leg 14.0
VOE Tooth 30AMRE Abrasive material with extra wear metal 7.8
VOE Locking device, complete*) 30P Standard 0.15
VOE Retainer 30/40R Standard
VOE Retainer 30/40MR Heavy Duty 1.1
VOE Tool 15/30T Tool for mounting and removal of teeth

EC235C VOE Adapter EA40BLW40 Extra long top leg for wear cap 23.1
ECR235C VOE Wear cap 40W 2.3
EC240/C VOE Tooth 40AMRE Abrasive material with extra wear metal 11.5
VOE Locking device, complete*) 40P Standard 0.2
VOE Retainer 30/40R Standard
VOE Retainer 30/40MR Heavy Duty 1.3
VOE Tool 40/55T Tool for mounting and removal of teeth

EC290/C VOE Adapter EA55BLW50 Extra long top leg for wear cap 32.0
ECR305C VOE Wear cap 55W 3.0
VOE Tooth 55AMRE Abrasive material with extra wear metal 15.9
VOE Locking device, complete*) 55P Standard 0.3
VOE Retainer 55/65R Standard
VOE Retainer 55/65MR Heavy Duty 1.3
VOE Tool 40/55T Tool for mounting and removal of teeth

EC330/C VOE Adapter EA65BLW50 Extra long top leg for wear cap 42.0
EC360/C VOE Wear cap 65W 4.0
VOE Tooth 65AMRE Abrasive material with extra wear metal 21.1
VOE Locking device, complete*) 65P Standard 0.4
VOE Retainer 55/65R Standard
VOE Retainer 55/65MR Heavy Duty 1.8
VOE Tool 65/125T Tool for mounting and removal of teeth

EC460/C VOE Adapter EA80BLW60 Extra long top leg for wear cap 53.0
VOE Wear cap 80W 4.7
VOE Tooth 80AMRE Abrasive material with extra wear metal 27.5
VOE Locking device, complete*) 80P Standard 0.5
VOE Retainer 80/125R Standard
VOE Retainer 80MR Heavy Duty 1.8
VOE Tool 65/125T Tool for mounting and removal of teeth

EC700/C VOE Adapter EA125BLW70 Extra long top leg for wear cap 77.2
VOE Wear cap 125W 8.0
VOE Tooth 125AMRE Abrasive material with extra wear metal 38.3
VOE Locking device, complete*) 125P Standard 0.8
VOE Retainer 80/125R Standard
VOE Retainer 80MR Heavy Duty 1.8
VOE Tool 65/125T Tool for mounting and removal of teeth

*) Locking device complete consists of pin and standard retainer. Note: Volvo Tooth System will also fit older machines from Volvo Construction Equipment.

11

Teeth and adapters for loader buckets

GPC/GPL General purpose tooth that gives AML Tooth for abrasive material handling and AMXL Tooth for abrasive material handling with

the bottom of the bucket a smooth and clean profile. where extra penetration is required. Undercuts extra large bottom surface on the wear shoe. Provides
Self-sharpening. slightly to give the cutting edge optimum protection. good penetration capacity in combination with long
Self-sharpening. service life. Undercuts slightly to give the cutting edge
optimum protection. Self-sharpening.

AMRL Tooth for highly abrasive material and rock FC Flush-mounted weld-on adapter for loader TL 1½ top leg adapter (long top leg), for welding

handling whith a focus on long service life. Undercuts and planing (leveling) buckets. Gives the bottom of the to both sides of the cutting edge. Should be used in
slightly to give the cutting edge optimum protection. bucket a smooth and clean profile. Commonly com- heavy duty applications.
Self-sharpening. bined with GPC/GPL tooth and NOT in combination
with segments.

BN Two leg adapter bolted to the bucket edge. CR Bolt-on corner adapters protect the BPL Bolt-on cast segments protect the bucket edge

Gives the cutting edge optimum protection. Should bucket corners. between the points.
NOT be used in heavy duty applications. Important: We recommend using
segments together with 1½ leg adapters or bolt-on
adapters, but NEVER with flush-mounted adapters.

FCB One leg adapter bolted to the bucket edge. MB Monoblock tooth. Tooth and adapter in one T Tool for easy mounting and removal of

Gives the bottom of the bucket a smooth and clean piece. locking devices.
profile.

P Locking device for tooth and adapter D es i gnat i o ns IMPORTANT! If the machine operates in
varying conditions, it is important to size
consists of a lock retainer and a reusable steel Example: tooth for a wheel loader. the teeth for the heaviest applications. In
pin. When it&#;s time to change adapter, it&#;s extremely demanding applications it may
also suitable to change the complete locking 15 GP L be appropriate to select a larger point
device. size than that what is specified. Contact
15 = size of tooth. your Volvo dealer for further information.
MR Heavy duty retainer in steel/polyure- GP = type of tooth. In this case, General Purpose.
L = Loader.
thane for work in very wet fine-grained clay
and coal handling. Example: adapter for a wheel loader.

PHS Steel locking for hot slag applications. LA 20 FC 40

Consists of a reusable steel pin, a steel LA = Loader adapter.
retainer and two springs. 20 = size of adapter.
FC = type of adapter. In this case, flush-mounted.
40 = thickness of bucket cutting edge.

12

Teeth and adapters for loader buckets

C GPC/GPL TeeTH

D Designation Volvo Part No A mm B mm C mm D mm Weight
kg

5GPC VOE 126 50 55 52 0.7

8GPC VOE 164 58 64 62 1.2

10GPL VOE 187 75 81 77 2.4

15GPL VOE 227 81 95 89 3.4

A 20GPL VOE 253 102 108 99 5.7

B 30GPL VOE 287 107 122 115 7.3

55GPL VOE 351 135 155 146 13.9

C

AML TeeTH Weight
D kg

Designation Volvo Part No A mm B mm C mm D mm

10AML VOE 195 45 81 77 2.5

15AML VOE 231 52 95 89 4.3

20AML VOE 256 63 108 99 6.1

B A 30AML VOE 290 74 124 115 9.1

55AML VOE 365 96 156 146 17.8

C
AMXL TeeTH

Designation Volvo Part No A mm B mm C mm D mm Weight
kg

D 15AMXL VOE 231 103 95 89 5.0

BA AMRL TeeTH

C Designation Volvo Part No A mm B mm C mm D mm Weight
kg

20AMRL VOE 246 114 109 101 7.6
VOE 281 127 122 115 10.7
30AMRL VOE 331 144 136 127 16.1
VOE 354 163 156 146 21.7
D 40AMRL
55AMRL

B A FC flush-mounted adapters
B
Designation Volvo Part No Cutting Edge Cutting Edge A mm B mm Weight
Thickness mm Angle ° kg
167 56
A LA5FC20 VOE 20 25 192 66 1.3
LA8FC20 VOE 20 25 237 80 1.8
LA10FC20 VOE 20 25 259 80 3.6
LA10FC25 VOE 25 25 299 92 3.7
LA15FC30 VOE 30 25 307 94 6.1
LA15FC35 VOE 35 25 360 106 6.8
LA20FC35 VOE 35 25 356 108 10.3
LA20FC40 VOE 40 25 385 124 8.8
LA30FC40 VOE 40 25 484 156 12.7
LA55FC65 VOE 65 30 23.0

TL top leg 1 1/2 (long top leg) adapters

B Designation Volvo Part No Cutting Edge Cutting Edge A mm B mm Weight
Thickness mm Angle ° kg
A LA10TL25 VOE 244 80
LA15TL30 VOE 25 25 292 95 4.0
B LA15TL35 VOE 30 25 292 96 6.3
C LA20TL35 VOE 35 25 328 107 6.2
LA20TL40 VOE 35 25 321 107 9.0
DA LA30TL40 VOE 40 25 354 119 8.7
LA40TL40 VOE 40 25 408 140 12.0
LA40TL50 VOE 40 25 410 139 19.8
LA55TL65 VOE 50 25 463 155 20.1
65 30 26.6

BN bolt-on adapters

Designation Volvo Part No Cutting Edge Cutting Edge A mm B mm C mm D mm Weight
Thickness mm Angle ° kg
LA10BN20 VOE 277 80 86 69
LA10BN25 VOE 20 25 289 80 87 78 4.9
LA15BN30 VOE 25 25 315 94 87 78 5.2
LA15BN35 VOE 30 25 361 94 111 100 6.8
LA20BN35 VOE 35 25 376 107 111 100 8.0
LA20BN40 VOE 35 25 387 107 100 110 10.5
LA30BN40 VOE 40 25 395 117 100 110 10.3
40 25 11.7

13

Teeth and adapters for loader buckets

B FCB BOLT-ON ADAPTERS

Designation Volvo Part No Cutting Edge Cutting Edge A mm B mm Weight
Thickness mm Angle ° kg

LA5FCB16 VOE 16 20 193 58 1.7

A CR bolt-on corner adapters
B
E Designation Volvo Part No Cutting Edge Cutting Edge A mm B mm C mm D mm E mm Weight
Thickness mm Angle ° kg

LA15CR30 VOE 30/35 25 329 94 &#; 167/171 23 9.5
LA20CR40 VOE 40 25 13.6
LA30CR40 VOE 40 25 413 108 81 151 28 16.3

425 118 81 153 28

C locking devices
DA
Designation Volvo Part No Description Length (L) mm Weight kg
L
L 5/8P VOE Locking device, complete*) 42 0.03
5/8R VOE Retainer, standard 22 &#;
L
L 10P VOE Locking device, complete*) 44 0.03

A 10R VOE Retainer, standard 28 &#;

15P VOE Locking device, complete*) 67 0.07
15/20R VOE Retainer, standard 39 &#;
15/20MR VOE Retainer, heavy duty 39 &#;

20P VOE Locking device, complete*) 76 0.1
15/20R VOE Retainer, standard 39 &#;
15/20MR VOE Retainer, heavy duty 39 &#;

30P VOE Locking device, complete*) 87 0.15
30/40R VOE Retainer, standard 51 &#;
30/40MR VOE Retainer, heavy duty 51 &#;

40P VOE Locking device, complete*) 97 0.2
30/40R VOE Retainer, standard 51 &#;
30/40MR VOE Retainer, heavy duty 51 &#;

55P VOE Locking device, complete*) 108 0.3
55/65R VOE Retainer, standard 64 &#;
55/65MR VOE Retainer, heavy duty 64 &#;

*) Locking device complete consists of pin and standard retainer.

Locking Devices, hot slag

Designation Volvo Part No Description Length (L) mm Weight kg

30PHS VOE Locking device, complete*) 94 0.2
30/40MRS 0.03
VOE Retainer, complete, hot slag**) 50

40PHS VOE Locking device, complete*) 105 0.3
30/40MRS 0.03
VOE Retainer, complete, hot slag**) 50

55PHS VOE Locking device, complete*) 117 0.4
55/65MRS VOE Retainer, complete, hot slag**) 62 0.05

*) Locking device complete consists of pin, retainer and two springs.
**) Retainer complete consists of retainer and two springs.

Segments

C Designation Volvo Part No Cutting Edge Cutting Edge A mm B mm C mm Weight
B Thickness mm Angle ° kg
336 112
BPL55BN65 VOE 65 30 378 39.5

tools for mounting and removal

Designation Volvo Part No Description Weight kg For tooth size

5/10T VOE Tool 0.9 5, 8, 10
15/30T VOE Tool 1.1 15, 20, 30
40/55T VOE Tool 1.3 40, 55

MB MONOBLOCK TOOTH

Designation Volvo Part No Cutting Edge Cutting Edge A mm B mm Weight
Thickness mm Angle ° kg
250 53
MB8 VOE 20 25 2.4

Dimensions and weights are approximate.

14

Teeth and adapters for excavator buckets

GPC/GPE General purpose tooth with goood AMRE Tooth with extra wear metal and longer PPC/PPE Pick point tooth for work in extremely

penetration and long service life. Self-sharpening. service life intended for rock and abrasive material. compact material. Maximum penetration capability in
Self-sharpening. hard clay, frozen ground etc. Can be used in
combination with TPC/TPE.

TPC/TPE Twin pick point tooth for work in SNC/SNE Spade nose tooth for levelling, BL 1 ½ bottom leg adapter (long bottom leg),

extremely compact material. Maximum penetration cleaning, grading and backfilling. for welding to both sides of the cutting edge.
capability in hard clay, frozen ground etc.
Can be used in combination with PPC/PPE.

BLU Weld-on bottom leg universal adapter. BLX Bottom leg adapter with extra long top leg for BLW Bottom leg adapter for wear cap with extra

welding to both sides of the cutting edge. Long bot- long top leg for welding to both sides of the cutting
tom leg. edge. Long bottom leg.

W Wear cap protects the adapter from MB Monoblock tooth. Tooth and adap- T Tool for easy mounting and removal of

unnecessary wear. ter in one piece. locking devices.

P Locking device for tooth and adapter D es i gnat i o ns IMPORTANT! If the machine operates in
varying conditions, it is important to size
consists of a lock retainer and a reusable Example: tooth for an excavator. the teeth for the heaviest applications. In
steel pin. When it&#;s time to change adapter, extremely demanding applications it may
it&#;s also suitable to change the complete 15 GP E be appropriate to select a larger point
locking device. size than that what is specified. Contact
15 = size of tooth. your Volvo dealer for further information.
MR Heavy duty retainer in steel/polyure- GP = type of tooth. In this case, General Purpose.
E = excavator.
thane for work in very wet fine-grained clay
and coal handling. Example: adapter for an excavator.

PHS Steel locking for hot slag applica- EA 20 BL 40

tions. Consists of a reusable steel pin, a EA = excavator adapter.
steel retainer and two springs. 20 = size of adapter.
BL = type of adapter. In this case, bottom leg 1 ½
(long bottom leg).
40 = thickness of bucket cutting edge.

15

Teeth and adapters for excavator buckets

GPC/GPE TEETH

C Designation Volvo Part No A mm B mm C mm D mm Weight kg

B A 5GPC VOE 126 50 55 52 0.7
C 8GPC VOE 164 58 64 62 1.2
B A 15GPE VOE 226 79 95 90 3.1
B D 20GPE VOE 256 90 109 99 4.5
C 30GPE VOE 279 105 122 115 6.7
B A 40GPE VOE 316 123 136 128 9.4
B C 55GPE VOE 358 132 148 145 13.0
B A 65GPE VOE 376 138 167 157 16.0
C 80GPE VOE 422 161 193 177 23.0

A AMRE TEETH D mm Weight kg

A Designation Volvo Part No A mm B mm C mm 89 3.6
100 5.4
15AMRE VOE 232 86 95 115 7.8
99 109 127 11.5
20AMRE VOE 257 114 122 145 15.9
133 137 157 21.1
30AMRE VOE 284 139 155 177 27.5
155 168 203 38.3
40AMRE VOE 330 169 191
183 222 D mm Weight kg
D 55AMRE VOE 362
65AMRE VOE 403 62 1.0
89 2.8
80AMRE VOE 438 101 4.0
115 5.6
125AMRE VOE 475 127 8.1
145 11.7
PPC/PPE TEETH 156 15.7
177 20.2
Designation Volvo Part No A mm B mm C mm
D mm Weight kg
8PPC VOE 173 9 64
15PPE VOE 233 11 95 62 1.5
20PPE VOE 283 31 111 90 3.7
30PPE VOE 310 35 122 99 5.4
D 40PPE VOE 361 36 136 116 6.9
55PPE VOE 389 49 156 127 10.6
65PPE VOE 440 53 168 147 14.7
80PPE VOE 462 59 191 157 20.1
180 25.5
TPC/TPE TEETH
D mm Weight kg
Designation Volvo Part No A mm B mm C mm
62 1.4
8TPC VOE 173 83 64 89 3.8
15TPE VOE 233 104 95 101 5.8
20TPE VOE 279 119 109 114 8.4
30TPE VOE 309 134 124 128 12.9
D 40TPE VOE 363 154 137 146 17.8
55TPE VOE 392 171 157 157 28.1
65TPE VOE 442 188 168
80TPE VOE 463 197 190 B mm Weight kg

SNC/SNE TEETH A mm B mm C mm 65 2.0
92 5.9
Designation Volvo Part No 163 111 67 107 10.4
232 127 94 119 12.5
8SNC VOE 273 151 111 140 20.1
15SNE VOE 300 177 122 153 24.5
20SNE VOE 334 207 137 167 31.6
30SNE VOE 378 234 155 167 34.6
D 40SNE VOE 419 254 168 188 40.8
55SNE VOE 188 40.1
65SNE VOE

BL bottom leg 1 1/2 (long bottom leg) adapters

Designation Volvo Part No Cutting Edge Cutting Edge A mm
Thickness mm Angle °

EA8BL20 VOE 20 25 182

EA15BL30 VOE 30 30 308

EA20BL40 VOE 40 30 370

EA30BL40 VOE 40 30 393

EA40BL50 VOE 50 30 459

EA55BLX50 VOE 50 30 459

EA65BL50 VOE 50 30 532

EA65BL60 VOE 60 30 529

EA80BL65 VOE 65 30 541

EA80BL70 VOE 70 30 541

16

Teeth and adapters for excavator buckets

B BLU BOTTOM LEG UNIVERSAL ADAPTERS

A Designation Volvo Part No Cutting Edge Cutting Edge A mm B mm Weight kg
B Thickness mm Angle °
147 57 1.2
EA5BLU VOE Universal 25

BLX EXTRA LONG TOP LEG ADAPTERS

Designation Volvo Part No Cutting Edge Cutting Edge A mm B mm Weight kg
Thickness mm Angle °
370 107 11.2
EA20BLX30 VOE 30 30 393 119 14.0
EA30BLX40 VOE 40 30 459 153 24.5
EA55BLX50 VOE 50 30

BLW EXTRA LONG TOP LEG ADAPTERS FOR WEAR CAP

A
Cutting Edge Cutting Edge
Designation Volvo Part No Thickness mm Angle ° A mm B mm Weight kg

EA40BLW40 VOE 40 30 459 137 23.1
EA55BLW50 VOE 50 30 484 156 32.0
EA65BLW50 VOE 50 30 541 169 42.0
EA80BLW60 VOE 65 30 586 187 53.0
EA125BLW70 VOE 70 30 637 220 77.2

W WEAR CAPS

Designation Volvo Part No A mm B mm C mm Weight
kg
40W VOE 112 138 57
55W VOE 132 159 60 2.3
65W VOE 146 176 66 3.0
80W VOE 147 186 73 4.0
125W VOE 178 223 81 4.7
8.0

locking devices

Designation Volvo Part No Description Length (L) mm Weight kg

5/8P VOE Locking device, complete*) 42 0.03
5/8R VOE Retainer, standard 22 &#;

L L 15P VOE Locking device, complete*) 67 0.07
&#;
15/20R VOE Retainer, standard 39 &#;

15/20MR VOE Retainer, heavy duty 39

20P VOE Locking device, complete*) 76 0.1
15/20R VOE Retainer, standard 39 &#;
15/20MR VOE Retainer, heavy duty 39 &#;

30P VOE Locking device, complete*) 87 0.15
30/40R VOE Retainer, standard 51 &#;
30/40MR VOE Retainer, heavy duty 51 &#;

40P VOE Locking device, complete*) 97 0.2
30/40R VOE Retainer, standard 51 &#;
30/40MR VOE Retainer, heavy duty 51 &#;

55P VOE Locking device, complete*) 108 0.3
55/65R VOE Retainer, standard 64 &#;
55/65MR VOE Retainer, heavy duty 64 &#;

65P VOE Locking device, complete*) 117 0.4
55/65R VOE Retainer, standard 64 &#;
55/65MR VOE Retainer, heavy duty 64 &#;

80P VOE Locking device, complete*) 130 0.5
80/125R VOE Retainer, standard 77 &#;
80MR VOE Retainer, heavy duty 77 &#;

125P VOE Locking device, complete*) 147 0.8
77 &#;
80/125R VOE Retainer, standard 77 &#;

80MR VOE Retainer, heavy duty

*) Locking device complete consists of pin and standard retainer.

17

Teeth and adapters for excavator buckets

locking devices, HOT SLAG

Designation Volvo Part No Description Length (L) mm Weight kg

L 30PHS VOE Locking device, complete*) 94 0.2
0.03
L 30/40MRS VOE Retainer, complete, hot slag**) 50

40PHS VOE Locking device, complete*) 105 0.3
30/40MRS VOE Retainer, complete, hot slag**) 50 0.03

55PHS VOE Locking device, complete*) 117 0.4
55/65MRS VOE Retainer, complete, hot slag**) 62 0.05

65PHS VOE Locking device, complete*) 127 0.5
55/65MRS VOE Retainer, complete, hot slag**) 62 0.05

80PHS VOE Locking device, complete*) 140 0.7
80MRS VOE Retainer, complete, hot slag**) 77 0.09

*) Locking device complete consists of pin, retainer and two springs.
**) Retainer complete consists of retainer and two springs.

Tools for mounting and removal

Designation Volvo Part No Description Weight kg For tooth size

5/10T VOE Tool 0.9 5, 8, 10
1.1 15, 20, 30
15/30T VOE Tool 1.3 40, 55
1.8 65, 80, 125
40/55T VOE Tool

65/125T VOE Tool

MB MONOBLOCK TOOTH

Designation Volvo Part No Cutting Edge Cutting Edge A mm B mm Weight kg
Thickness mm Angle °
250 53 2.4
MB8 VOE 20 25

Dimensions and weights are approximate.

18

Changing Volvo teeth

1. Before you start

1 Use a hammer, weight approx. 1 kilo, and protective gear: a 2 To make work easier, Volvo has developed a special tool. 3 To make tooth mounting easier, angle back the bucket a
hard hat, protective glasses, gloves and work shoes. It consists of a handle and a head. The head consists of two bit so that the adapters face slightly upwards.
pins, one shorter and one longer, as well as a striking surface
2. Dismantling of teeth for each pin. The tool is available in different sizes, depending
on tooth size.

5 Place the tool&#;s longer pin in the
opening for the lock pin. Drive out the
lock pin using a hammer, so that the lock
retainer is removed from its seat. Drive
out the lock pin so that it comes out on
the underside. Remove the tooth.

4 Clean the opening for the adapter&#;s lock pin.

3. Mounting of teeth

6 Thoroughly clean the adapter&#;s nose and the hole for 7 Fit the tooth on the adapter&#;s nose, so that the tooth&#;s 8 Fit the lock pin in the adapter&#;s nose, so that the arrow
the lock pin, so that the tooth and lock pin can be fitted in the guide lugs fit in the adapter&#;s slots. on the lock pin faces down and the lock retainer faces
correct position. forward toward the tip of the tooth. Always use a new lock
retainer in the correct size.

9 Check manually that the lock pin has been moun- 10 Drive down the lock pin using a hammer so that the 11 Drive down the lock pin to the correct position with
ted correctly. lock pin is flush with the top of the adapter body. a hammer and the shorter pin on the tool. Use a correctly
sized tool.

12 The lock pin is mounted cor-
rectly when the mark in the hole is
visible just above the lock pin.

19

Always use genuine Volvo parts. They are the surest way to
high machine availability and good operating economy.

Every genuine part is developed and manufactured together
with all other machine components. It is a complete system
where each separate part works in perfect harmony with
the others. Only by using genuine Volvo parts can you be
completely sure of keeping the system intact and maintaining
the qualities and features Volvo intended from the beginning.

By choosing genuine Volvo parts, you know that your
machine will function as intended in the future as well.
Down to the smallest detail.

More care. Built in.

Under our policy of continuous improvement, we reserve the right to change specifications and designs without prior notice.
Contact your dealer for further information.

Ref. No. VOE 21A English

Printed in Sweden .02&#;1.0 CST

Volvo, Eskilstuna

G-Top supply professional and honest service.

-06-28 17:25:21

Bucket Teeth Types and Characteristics

Through a lot of practice, it has been proved that there are many factors affecting the service life of bucket teeth. Besides the ore structure, the degree of hardness and softness, the blasting situation and the maintenance of excavators and the operation level of drivers, the structure and shape of bucket teeth have a great influence. With the rapid development of computer technology, finite element analysis and other technologies have been widely used in product structure design. The structure and shape of bucket teeth manufactured by bucket teeth manufacturers have been finalized and serialized, so the material and manufacturing process methods have become the main research contents.

At present, the bucket teeth produced by domestic bucket teeth manufacturers are mainly used in the following several kinds of mines, below we will specifically understand:

1. The bucket teeth of high manganese steel and high manganese steel are the earliest and most widely used bucket teeth in the world. The steel selected by bucket teeth manufacturer is a single austenite structure. Its remarkable feature is that it has a strong work hardening ability. Under the condition of strong impact or gravity extrusion, the surface hardening occurs, and the hardness is much higher than before. This high hardness surface layer makes the bucket teeth have good wear resistance, while the internal throwing keeps good toughness. The bucket teeth manufactured by bucket teeth manufacturer are suitable for use under impact or extrusion conditions, but not suitable for excavating soft minerals such as coal or soil.

2. Surfacing bucket teeth manufactured by surfacing bucket teeth manufacturer is a method to improve the wear resistance of bucket teeth by surfacing a layer of cemented carbide on the base of carbon steel or alloy steel. This kind of bucket teeth has a hard surface and good toughness in the core. It is suitable for excavating soft ore or medium hardness ore. This process can make the wear-resistant layer of bucket teeth worn to a certain extent, disassemble and re-surfacing wear-resistant alloy and use it many times. It is convenient, flexible, low cost and strong applicability, so it has a great competitive advantage. Due to the manufacturing process characteristics of bucket teeth manufactured by bucket teeth manufacturers and the maturity of surface strengthening treatment technology, surfacing bucket teeth have become a product with wide applicability and great potential for development.

If you are looking for more details, kindly visit Volvo Bucket Adapters.

3. The manufacturing method of inlaid bucket teeth in bucket teeth manufacturer is to use whole block of high chromium cast iron or WC cemented carbide to pour bucket teeth together to help the head of bucket teeth, so as to improve the wear resistance of bucket teeth. Because of the poor inclusion between the inlay block and the matrix, this method is prone to crack during heat treatment, and the process is not yet mature, which needs further study.

4. The bucket teeth of alloy structural steel have two forms: integral bucket teeth and combined bucket teeth. Especially the combined bucket teeth, which have novel design structure and convenient replacement of tooth caps, have broad market prospects. The disadvantage is that the manufacturing process is complex, especially the combination of the bucket teeth seat and the cap requires higher precision, the casting and heat treatment process is difficult to control, and the bucket teeth producer has a higher cost of manufacturing this kind of bucket teeth.

In summary, according to the production characteristics of bucket excavator and combined with the conditions of mining medium hardness ore, bucket teeth manufacturers usually choose surfacing bucket teeth as the main research.

  Huangzuan Machinery established in , is a specialized manufacturer of bucket teeth, bucket adaptor and side cutter which is used Caterpillar, Komatsu, Hyundai, Daewoo, Kobelco, Hensley, Liugong, Hitachi, XCMG, XGMA, Volvo, JCB .etc.

 With production facilities covering an area of square meters and staff of 100, our annual processing capability equals approximately 12,000 metric tons. we currently have the technology of lost wax casting, precoated sand casting, resin sand casting, have the advanced instrument such as spectromaxx, Brinell hardness tester, universal testing machine, metalloscope.

Contact us to discuss your requirements of Loader Bucket Teeth Manufacturer. Our experienced sales team can help you identify the options that best suit your needs.