Ultimate Guide to Plastic Wall Skirting Installation

Jun. 07, 2024

Plastic wall skirting is a popular choice for both residential and commercial buildings. It not only provides a finishing touch to a room but also protects the walls from scuffs and damage. Installing plastic wall skirtingplastic wall skirting is a straightforward process that can be done by DIY enthusiasts. This ultimate guide will walk you through the steps of plastic wall skirting installation to help you achieve a professional-looking result.

**Choosing the Right Materials**.

Before you start the installation process, it is essential to choose the right materials for your plastic wall skirting. Make sure to measure the length of the walls that need skirting to determine the amount of material you will need. Additionally, select a skirting profile that complements the style of your room.

**Preparing the Wall Surface**.

The first step in installing plastic wall skirting is to prepare the wall surface. Remove any existing skirting boards and clean the walls to ensure a smooth and even surface for installation. Fill in any gaps or holes with a suitable filler and sand down any rough areas.

**Measuring and Cutting the Skirting**.

Once the wall surface is prepared, measure the length of the walls where the skirting will be installed. Use a pencil to mark the cutting lines on the skirting boards based on your measurements. Use a saw to cut the skirting boards to the correct length, making sure to cut at a 45-degree angle for corners.

**Attaching the Skirting to the Wall**.

After cutting the skirting boards to size, the next step is to attach them to the wall. Apply a suitable adhesive to the back of the skirting board and press it firmly against the wall. Use a spirit level to ensure that the skirting is straight and level. Secure the skirting in place with brad nails or screws, being careful not to damage the skirting or the wall.

**Finishing Touches**.

Once all the skirting boards are installed, the final step is to add finishing touches to achieve a professional look. Fill any gaps between the skirting boards and the wall with a suitable filler and sand down any excess filler once it has dried. Paint or stain the skirting boards to match the décor of the room for a seamless finish.

**Maintenance and Care**.

To ensure your plastic wall skirting stays in top condition, regular maintenance is essential. Keep the skirting clean by wiping it down with a damp cloth and mild detergent. Avoid using harsh chemicals or abrasive cleaners that could damage the skirting's appearance. Inspect the skirting regularly for any signs of damage or wear and tear, and make any necessary repairs promptly.

In conclusion, installing plastic wall skirting is a simple and effective way to enhance the look of your walls while protecting them from damage. By following the steps outlined in this ultimate guide, you can achieve a professional finish that will complement your room's style. If you have any questions or need assistance with plastic wall skirting installation, feel free to contact us for expert advice and guidance.

Want more information on plastic coated skirting board, skirting board plastic? Feel free to contact us.

Comments

All Comments (0)

Previous: What's your favorite cutter for edge banding?

Next: Top 5 Must-Have PVC Panel Accessories Guide

Guest Posts

If you are interested in sending in a Guest Blogger Submission,welcome to write for us!